Kenmore Coldspot Model 106 Light Bulb Replacement (2024)

FAQs

How do I know what light bulb I need for my fridge? ›

Fridge light bulbs are typically 40- or 60-watt or T8 with an intermediate base. Microwave ovens often require a 25-watt T7 microwave light bulb. Dryers often use a 10-watt, 120-volt C7 bulb.

Similarly, lightbulbs for refrigerators are manufactured to withstand cold environments. Even though a regular lightbulb may fit in terms of size, you should only use an appliance lightbulb, which is a lightbulb designed to adapt to the extreme conditions and temperatures found in appliances.

The 40 watt appliance bulbs are used in the fresh food as well as the freezer sections. Some Refrigerator models use a 60 watt bulb. This is not specifically an appliance bulb but is a standard incandescent light bulb.

Unplug the refrigerator or disconnect the power. Remove the light shield when applicable.

Refrigerator lightbulbs are installed to help you identify and arrange your food items easily. So, if the lightbulb has stopped working, your refrigerator can still work as normal. However, a light that is out when the bulb is just fine may indicate that power to the whole fridge is off.

If your refrigerator light is not coming on, it may be that the bulb has reached the end of its lifespan and has burned out. Check the bulb to see if it has a dark area in the bulb or has a broken and loose filament.

Another common A-series light bulb type is the A15 bulb which is commonly used in the US for appliances and ceiling fans. The A15 bulb is 15⁄8 in (1+7⁄8 in; 48 mm) wide at its widest point and 3.39 inches tall.

Numbers in a bulb code indicate size in millimeters or eighths of an inch. These codes will tell you if a bulb will fit in your fixture and if it's the right shape. For every light fixture or application, there's going to be a specific bulb or light bulb shape that will fit best and provide the right type of light.

The blue lights are used because; Blue LEDs could provide similar protection from bacteria to preservatives. The light is most effective when applied to food in acidic environments.

Yes, they are interchangeable. The difference between E26 and A19 is simply a matter of size and shape. The base type for standard A19 light bulbs is E26. A19 bulbs have an E26 base and will fit into sockets approved for Edison bulbs.

Why is the LED light not working on my Kenmore refrigerator? ›

Kenmore Refrigerator LED Light

The most likely cause for a refrigerator light not working is the LED light has burned out. You can confirm the light is defective by using a multimeter to test for voltage present at the LED light plug-in wire connecter.

Unplug your refrigerator. Get a strong hair dryer and heat up both the bulb and the light socket. If the bulb is cold frozen this will thaw it out. If the bulb is sticky stuck the heat will make the sticky gooye and allow the bulb to turn.